While using the HP printer if you face the HP OfficeJet Pro Error c9c70000 initially wait until the printer is idle or silent before you start kindly, check is the Ink system display failure or Supply System also, skip to update from the printer firmware. Here are the few steps to troubleshoot and Fix HP OfficeJet Pro Error Code c9c70000.
Steps to Fix HP OfficeJet Pro Error Code c9c70000
Step 1: First reset the printer and make sure your printer would be switch on if it’s not.
Step 2: Also wait until the printer is idle or silent.
Step 3: Once the printer turned on make sure disconnect the all power cord from your printer.
Step 4: And unplug the all power cable from the wall outlet as well.
Step 5: Wait for 50 to 60 seconds.
Step 6: Then plug the all power cables.
Step 7: Switch on the printer, if it’s not turn automatically.
Step 8: Once you connect the all cables wait until the printer is idle or silent before you proceed the printer jobs.
If HP OfficeJet Pro Printer Error Code c9c70000 still persist, try below options also, first open the ink cartridge.
1: Wait for once again until the printer is idle or silent before you start.
2: Push the ink cartridges and release it.
3: Push in on the facade of one of the ink cartridges to discharge it, and after that pull it toward you to evacuate it.
4: Evacuate the other three ink cartridges.
5: Close the ink cartridge gets to the entryway.
6: Check the printer control board.
Related Blog: Fix HP OfficeJet Pro 6968 Printer Failure Error 0x6100004a?
If the printer shows an Ink system failure or supply system we have to follow the few more steps.
1: Locate a spotless, build up free fabric (eyeglass wipes or espresso channels function admirably) that you can use to clean the ink cartridge contacts.
2: Softly hose a perfect, build up free material with packaged or refined water.
3: Delicately wipe the copper-shaded contact with the ink cartridge.
4: Wipe the contact with a dry, build up free material.
5: Trust that the ink cartridge will dry before you proceed (around 10 minutes).
6: Reinsert the ink cartridge into its opening, and afterward drive the ink cartridge forward until the point that it fits properly.
7: Rehash these means for the majority of the ink cartridges.
8: Close the ink cartridge gets to the entryway.
9: Check the control board to check whether the blunder message perseveres.
For more information or Fix HP OfficeJet Pro Error Code c9c70000, you can call us at HP Printer Toll Free Number 1 (800) 576-9647 for any kind of help related to HP OfficeJet Printer.
Note: Before you call the HP support make sure you check either Printer is new or old (Printer warranty is valid for not)